![Victron BatteryProtect BP-220 - 220AMP - 6-35 VDC [BPR000220400]](http://euroboatparts.com/cdn/shop/files/82915BXL_{width}x.jpg?v=1740150028)
PRODUCT DETAILS
BatteryProtect BP-220 - 220AMP - 6-35 VDC
Features:
- The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
- 12/24V auto ranging The BatteryProtect automatically detects system voltage
- Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.
- A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
- Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
- Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
- Ignition proof No relays but MOSFET switches, and therefore no sparks.
- Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Quick Guide (pdf)
Brochure (pdf)
Victron BatteryProtect BP-1...Victron BatteryProtect BP-220 - 220AMP - 6-35 VDC [BPR000220400]
The vast majority of our products come from the United States, which explains our delivery times consequently between 1 and 4 weeks. It is possible to receive your parcels in express (7 working days) for some products, you will find all the information on the delays and on the costs according to each product on the product page.
SHIPPING POLICY
1. Costs and shipping options Shipping costs vary according to the country of the recipient. Our products are shipped from the USA to France, and we dispatch all our orders from France. The final dispatch shipping costs will be displayed during the purchase of your order (before payment) according to each country and the delivery options chosen.
2. Delivery time Most of our products come from the USA. Therefore, we have a preparation time of 1 to 2 weeks to receive the goods at our French office at 7 rue Alaric II 31000 Toulouse for final shipment. It takes 1 to 3 weeks from the order date to the delivery date. It is possible to receive your parcels in accelerated shipment for certain products in stock at our French office. You will be able to see the exact delivery times, shipping costs, and whether the product(s) you have chosen is (are) eligible for express shipping when you place your order. This may vary depending on your delivery address.
REFUND POLICY
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@stock4less.eu If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@stock4less.eu.
Damages and issues
Please inspect your order upon reception and contact us if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Return procedure
When you contact us to request a return, we will send you a prepaid return label with which you can return your package. This will be a label from your local post office or DHL depending on your location. You then just have to follow the procedure that will be indicated to you. Once we receive your return, we will send you your refund using the same method as your payment, or we will send a new product depending on your request.