PRODUCT DETAILS
Features:
Wiring
- Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.
Solenoids
- They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
Motor
- A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.
Brackets
- Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.
Pump
- Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.
Motor Cover
- 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.
Cylinders
- Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
A stainless steel spring retracts the cylinder when the boat is not in motion.
Trim Tabs
- 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.
Hose
- Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.
Stainless steel clamps hold the hose to barb fitting at the solenoid.
Rocker Type Controls
- Mounted on the dash they are easy to operate.
One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.
Specifications:
- Construction: Stainless Steel
- Actuator Type: Hydraulic
- Box Dimensions: 9"H x 12"W x 19"L WT: 21.8 lbs
Quick Guide (pdf)
Owner's Manual (pdf)
Boat Leveler 12" x 8" Trim Tab Set [N128000]
The vast majority of our products come from the United States, which explains our delivery times consequently between 1 and 4 weeks. It is possible to receive your parcels in express (7 working days) for some products, you will find all the information on the delays and on the costs according to each product on the product page.
SHIPPING POLICY
1. Costs and shipping options Shipping costs vary according to the country of the recipient. Our products are shipped from the USA to France, and we dispatch all our orders from France. The final dispatch shipping costs will be displayed during the purchase of your order (before payment) according to each country and the delivery options chosen.
2. Delivery time Most of our products come from the USA. Therefore, we have a preparation time of 1 to 2 weeks to receive the goods at our French office at 7 rue Alaric II 31000 Toulouse for final shipment. It takes 1 to 3 weeks from the order date to the delivery date. It is possible to receive your parcels in accelerated shipment for certain products in stock at our French office. You will be able to see the exact delivery times, shipping costs, and whether the product(s) you have chosen is (are) eligible for express shipping when you place your order. This may vary depending on your delivery address.
REFUND POLICY
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at info@stock4less.eu If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at info@stock4less.eu.
Damages and issues
Please inspect your order upon reception and contact us if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Return procedure
When you contact us to request a return, we will send you a prepaid return label with which you can return your package. This will be a label from your local post office or DHL depending on your location. You then just have to follow the procedure that will be indicated to you. Once we receive your return, we will send you your refund using the same method as your payment, or we will send a new product depending on your request.