Mold & Mildew Stain Remover - 32oz

Say goodbye to stubborn mold and mildew stains with Xanigo Marine’s Mold & Mildew Stain Remover! This powerful formula is easy to use and is the perfect solution for removing mold and mildew stains from boat tops, vinyl cushions, chairs, canopies, and more. Its versatile formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, counters, and other surfaces that may be prone to mold and mildew.

Simply spray the product onto a cool substrate, let it soak for a few minutes, and watch the mold and mildew disappear. To ensure the best results, avoid using it in direct sunlight.

After removing it, make sure to PREVENT the mold from coming back with Xanigo Marine’s Mold & Mildew Preventer.

Specifications:

Bottle Size: 32 ounces

STEP 1: Remove Mold & Mildew with Xanigo Marine's Mold & Mildew Stain Remover

Xanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.

STEP 2: Neutralize the Remover

After rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.

STEP 3: Prevent Mold & Mildew with Xanigo Marine's Mold & Mildew Preventer

With just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.

Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.

STEP 4: Maintain Seats with Xanigo Marine's Waterless Wash

Keep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.

Also, a great way to shine up a gel coat quickly!

Specifications:

Type: Mildew & Moisture
Box Dimensions: 4"H x 4"W x 10"L WT: 2.5 lbs
UPC: 860007772788

Quick Guide (pdf)

Xanigo Marine Mold Mildew Stain Remover - 32oz [XMRM32]